Seamingly Straight Inc.

General product information

Bullet Proof Graffiti Armor
Bullet-Proof utilizes revolutionary nanotechnology and is a high-performance, highly fluorinated and durable NON-SACRIFICIAL coating formulated for applications requiring extremely high-slip characteristics and chemical resistance. This Bullet-Proof exhibits outstanding, long-lasting performance properties. This product is the worlds first graffiti deterrent coating as most spray paints, lacquers, enamels and adhesives chemically can not stick to it. When a tagger attempts to vandalize a surface protected with the Seal Americas Bullet Proof Graffiti Armor, the taggers paint will crawl together and run off the surface. Bullet-Proof is a penetrating, non-yellowing, non-whitening, non-toxic, permanent weather-proofing and Anti-Graffiti treatment. The product is highly resistant to hydrocarbons, graffiti, ozone, salt spray, acid rain, and a wide variety of chemicals and is VOC and AQMD compliant. The fluorinated polymer makes this coating impervious to UV degradation. This Product exhibits outstanding weathering characteristics by allowing for expansion, contraction, building movement and temperature extremes. The product will allow moisture vapor to escape while not allowing moisture to enter the structure. Bullet-Proof is ideal for architectural masonry, stone, wood, fiberglass, carbon fiber, ferrous and non-ferrous metals, glass, brick, masonry and concrete applications. Bullet-Proof provides a high quality finish in either glossy or matt, and offers exceptional performance with an expected life span of up to 20 years.

Meets all US Military industrial coating specifications.

Bullet-Proof is non-toxic, non-flammable, environmentally friendly, non-reactive and has a HMIS B Rating for Personal Protection. Bullet-Proof is a two component coating system supplied in two separate containers. Good surface preparation and cleaning of all substrates to be coated is essential for optimum performance of the coating system. All surfaces to be coated should be clean, dry and free from contaminants. For optimum appearance properties, spray two coats to a minimum of 2 mils DFT/50 microns DFT. Always allow each coat to flash off to a tacked state prior to applying a following coat. Refer to label for additional detailed instructions.